Discharge print on the ROQ E with Avient Aquarius Inks at MADE Laboratory's WB camp!
- Cristen Sousa
- 2 days ago
- 1 min read
So, discharge base, the same pigments that you use across the system, activate with ZFS. So, I always default to 5% just so I get a really soft print.
I'm using less material.
You can start a timer.
Let's set it at 10 minutes.
You'll see bubbles start to occur.
As they're dissolving, they're outgass. We want to trap it in there with a lid. That way, it pushes that gas back into the matrix of the ink, and you get a full develop of the ink. Discharge.
Typically, you print wet on wet. Since we have four colors, we should be able to do this wet and wet fine.
.png)
Comments